Deploy the Webex video integration for Microsoft Teams.
Default: “”. For more logging configuration options, see the Configure Logging in Kibana guide. Level at which a log record should be logged. Supported levels are: all , fatal , error , warn , info , debug , trace , off. Levels are ordered from all highest to off and a log record will be logged it its level is higher than or equal to the level of its logger, otherwise the log record is ignored. Use this value to change the overall log level. Default: info. Set to all to log all events, including system usage information and all requests.
Set to off to silence all logs. You can also use the logging cli commands to set log level to verbose or silence all logs. The following example shows a valid verbose logging. These settings cannot be used in conjunction with server. If PKI authentication is enabled, this chain is also used by Kibana to verify client certificates from end users. In addition to this setting, trusted certificates may be specified via server. If the keystore contains any additional certificates, those will be used as a trusted certificate chain for Kibana.
The certificate chain is also used by Kibana to verify client certificates from end users when PKI authentication is enabled. This setting cannot be used in conjunction with server. It is not recommended to disable protections for arbitrary API endpoints. Instead, supply the kbn-xsrf header. The server. Enables the Explore underlying data option that allows you to open Discover from a dashboard panel and view the panel data.
When you create visualizations using the Lens drag-and-drop editor, you can use the toolbar to open and explore your data in Discover. For more information, check out Explore the data in Discover. Kibana Guide [8. Configure Kibana edit. We recommend you directly copy and paste the command from Control Hub to PowerShell when possible or verify the text using a plain text editor before pasting to PowerShell. To enable the integration for all users in your organization, copy the text of the Grant-CsTeamsVideoInteropServicePolicy command from the second text box.
To enable the integration for an individual user, copy the text of the Grant-CsTeamsVideoInteropServicePolicy command from the second text box. Replace -Global with -Identity , and add the user’s email address after it. The PowerShell changes to the Microsoft tenant can take time to propagate in the Microsoft environment. Microsoft warns this can take up to 6 hours, although it typically takes less than 20 minutes.
You can test if the changes for an user have become active by having the user create test meetings in their Microsoft Outlook or Microsoft Teams client. If the changes have successfully propagated, you should see the video integration join details in the meeting invitation created as shown in Overview.
If the join details are not present, wait longer and repeat the test again. To take full advantage of the calendar and OBTP Join features of the Hybrid Calendar Service, make sure your Webex devices are either registered to the Webex cloud or linked to the cloud using Edge for devices. With OBTP, Webex devices in your organization automatically show a Join button shortly before the Microsoft Teams meeting starts, when they’re included in the meeting:.
Personal mode devices show the button if the user associated with the device accepts the meeting invitation. The user must be enabled for the calendar service in Control Hub. Shared mode devices show the button if the room mailbox email address associated with the device accepts the meeting invitation. The device’s workspace must be enabled for the calendar service in Control Hub. The Hybrid Calendar Service will only process a meeting invitation to add the details needed for OBTP if the meeting scheduler or at least one of the invitees has the service enabled.
If your organization doesn’t have many calendar service enabled users, it may be common for a device invitation to trigger the processing, rather than the scheduler or a user. When this happens, it’s critical that your Exchange configuration retain all of the details that the service needs in the invitation. By default, the Exchange Online settings delete the meeting details from invitations sent to room mailboxes.
Apply the following PowerShell commands to the room mailboxes of all shared mode devices that you enable for the Hybrid Calendar Service:. If you want to be able to forward invitations scheduled from outside of your Microsoft organization to the device, add the following command:. The devices must be either registered to the Webex cloud or linked to the cloud using Edge for devices. As an alternative, you can simplify joining for the affected devices by adding the SIP IVR video address of the Microsoft Teams meeting as a speed dial or macro.
This section explains limitations and feature behavior for the Video Integration for Microsoft Teams. We currently support a relationship between Webex organizations and Microsoft tenants:.
Your Microsoft tenant can support multiple different video integrations; for example, the tenant can simultaneously interoperate with Cisco and Poly. However, the tenant can only have one integration of each type; so, one from Cisco, and one from Poly. If you have multiple Webex organizations, choose one to interoperate with your Microsoft tenant using the Webex video integration.
We only support the Worldwide instance of Microsoft We only support commercial Webex organizations in countries and regions where Webex paid subscriptions are available. The integration only supports incoming SIP calls, not H. The integration doesn’t support calling into a Microsoft Teams meeting using the Webex App.
In addition, the integration doesn’t support features that require pairing or connecting the Webex App to a device. This includes wireless sharing, dialing from the Webex App, and call control from the Webex App. Interactive white boarding from Webex devices is not available for meetings on Microsoft Teams.
Users can share whiteboards from the device as video content BFCP support. Video integration participants can cycle through different layout options, by sending DTMF tones 2 and 8 from the device. Participants can use the Cisco Touch interface to change layouts on devices that support ActiveControl. This works with both cloud calling and SIP. Participants can see up to nine video streams at the same time.
The number of visible streams also depends on the selected layout and the device type. Layouts show letter avatars instead of video when participants are not sending video streams to the meeting. Panorama-specific layouts and camera behaviors are not supported and operate like a standard dual monitor configuration. The service does not support the iX immersive experience, but those devices may connect as TIP endpoints without immersive specific features. Supported layout families may differ depending on the device type.
Using the layout controls will not change the active layout while two monitors display incoming participant video. Dual monitor configurations without a dedicated presentation monitor will switch to a single participant monitor while content sharing is active and layout controls will be operable for the participant monitor while content sharing is active.
When dialing into a Teams meeting that is hosted by another Microsoft tenant, you must use the video address of the video integration that is enabled for that tenant. Video integration participants don’t have controls to start or stop meeting recordings. Microsoft Teams users must manage meeting recording. Content sharing uses BFCP and is subject to the limitations of that protocol, including no ability to share applications or allow remote control.
Meeting options for limiting sharing do not apply to participants using the video integration; these participants are always allowed to share in a meeting. When Microsoft Teams participants share, only the sharing Desktop or Window options are viewable by video integration participants. Video integration participants can’t view files or the PowerPoint or Whiteboard options shared from the Microsoft Teams client.
Microsoft Teams participants can mute video integration participants, but can’t unmute them for privacy reasons. Local mute doesn’t update the roster. If the mute indicator is on, how the participant unmutes can affect the indicator differently depending on the type of calling that the device uses:.
Cloud calling—The participant can unmute locally to clear the mute indicator in the participant list. Unmuting locally doesn’t clear the mute indicator in the roster. Webex devices connecting through the video integration have the Webex IVR and splash screens localized to the language set in the device. US English is the default for all other scenarios. Trusted devices from your own organization can streamline how they join meetings by automatically bypassing the Microsoft Teams lobby.
A device is considered trusted in either of the following cases:. It is a Webex device using cloud calling, and registered to the Webex organization where you deploy the video integration.
If the meeting organizer edits the lobby settings to only admit the host, callers that are treated as trusted as noted above will not be restricted by this setting and will still bypass the lobby automatically. If you disable Anonymous users can join a meeting in the Microsoft Teams tenant settings, then video integration participants cannot join through the lobby.
Video integration participants who would normally bypass the lobby will still be able to join Microsoft Teams meetings. Calls to the video integration do not use Webex Video Mesh nodes; traffic is direct from the device to the cloud. The specialized media clusters used by the video integration for Microsoft Teams are not part of the reachability tests that Webex-registered devices perform.
Jun 2, view s people thought this was helpful. Overview Video device join experience, from the meeting invitation Alternative video device join method—direct dial Alternative video device join method—Join button Requirements for video integration with Microsoft Teams Ports and protocols for video integration traffic Create the video integration from Control Hub Join button and Hybrid Calendar considerations Exchange mailbox requirements for OBTP Supported device types for OBTP Features and limitations Overview This integration enables your video devices to join Microsoft Teams meetings.
Here’s how the integration enhances the device user’s experience when they join Microsoft Teams meetings hosted in your organization: Webex meeting experience—multi-screen with flexible layout options Participant list showing both Microsoft and video integration participants Bi-directional content sharing between the device and Microsoft Teams Recording indicator on the device.
Video device join experience, from the meeting invitation A standard email invitation to a Microsoft Teams meeting has meeting join details that include a clickable link to join the meeting from the Microsoft Teams client. Figure 1: Video join details in Microsoft Teams meeting invitation When it is time to join the meeting, video device users can call the SIP video address listed under the Join with a video conferencing device heading. Figure 2: Alternate VTC dialing instructions hyperlinked meeting-specific web page.
Requirements for video integration with Microsoft Teams Requirement Notes An active Webex organization If you do not yet have an active Webex organization, we will provision one for you when you purchase the video integration. A Microsoft tenant with Microsoft Teams accounts for users in the organization The setup process requires an account that can sign in as a Global administrator for the tenant to grant application permissions, and a Microsoft Teams administrator account for the tenant that can execute PowerShell commands.
Ports and protocols for video integration traffic Signaling Video devices connect to the Webex data centers for signaling. Table 1. Media The media path for video integration calls differs from other Webex Meetings call flows because specialized media clusters handle this call type. Table 2. Create the video integration from Control Hub Follow these steps to register Microsoft Teams to the Webex cloud, authorize service permissions with Microsoft, and enable Cisco video devices to join Microsoft Teams meetings.
Before you begin. The browser should redirect you to the Control Hub Video Integration Setup screen when you’ve finished the authorization steps. If it does not, try these steps again.
Import-Module MicrosoftTeams. What to do next.
Zoom stuck on “Connecting” for 30 to seconds – Video/Web Conferencing.Zoom Meeting cannot start from Google Chrome-Why – Zoom Guide
Whenever I connect to a Zoom call over WiFi from my laptop, the Zoom desktop application starts and sits on the “Connecting Internet speeds are plus megabytes up and down. I disabled the antivirus completely as well, but Zoom still struggle to connect. To add – some days, like today, the Zoom client is connecting without problems but I know it’s going to happen again.
Demo in text : I click the invitation link or input the meeting info manually, Zoom window changes to my live webcam view and says “Connecting Just wanted to reach out and see if anyone who’s had this issue was able to resolve it. Many thanks in advance! Never had that issue. But to help get suggestions, can you provide a little more information. I have noticed that sometimes my invites fail but I can respond and connect to an invite – have you tried both ways? What laptop with what OS are you using?
You state that you are using an AV and so I am guessing it is Windows For Zoom calls I use Linux Mint and that works really well. Yes, I’ve tried using the invitation link, and inputting the call info manually and no joy. Currently running Win 10 Enterprise on a Microsoft Surface Book with BitDefender antivirus which is utilized across all devices, yet I’m the only one having this issue. Initially, I thought it was a server side issue but everyone else is connecting to the calls without issue.
Today Zoom was actually connecting to calls after seconds of joining a meeting, but it’ll likely happen again. It’s been acting like this for about two weeks now. The error codes indicate that you have poor connectivity and the question is where is this occurring.
You could have intermittent WiFi caused by equipment such as a microwave. You could try Wireshark but that takes time to learn and use.
If anyone else has a laptop in the house then try that. I have the same problem error code , only on a single computer with BitDefender Total Security installed on it; after many unsuccesful tries, the connection worked only after uninstalling BitDefender which had been configured ok, with all the right permissions for Zoom. After reinstalling BitDefender, the error comes again. On the other 2 computers using Bitdefender in out small network, Zoom is working fine, without this issue.
I’m also interested what would be the solution to this. I believe I tried adding exceptions to the AV software before, but I’ll give it another go. Odd thing is that all the clients are utilizing the same AV software none have exceptions for Zoom configured and there’s only one or two clients having this connection issue with Zoom.
I’ll report back if any new info arises. This topic has been locked by an administrator and is no longer open for commenting. To continue this discussion, please ask a new question. Hello fellow spiceheads. Does anyone know where I can find instructions for deploying software to a system the next time it comes online using SCCM? I know it’s possible because we were using SCCM to install the antivirus, if it was missing, when systems ca Your daily dose of tech news, in brief.
Good morning and welcome to today’s briefing. We have a lot of security news and patches regarding Microsoft Products. We have two good Security Conscious o I have little experience, just some marketing experience and social media video editing. Well known insurance company.
Company completed the fir Hi, Having an interesting issue where our users Win10 are seeing duplicate printers in their printer list on their PCs. We tested by removing some printers that Online Events. Log in Join.
Video Conferencing. Hi everyone, Whenever I connect to a Zoom call over WiFi from my laptop, the Zoom desktop application starts and sits on the “Connecting Spice 3 Reply 6. Spice 1 flag Report. OP CalvinandHobbes Spice 2 flag Report. New contributor pimiento. Thanks again! Read these next
– Zoom meeting connector firewall ports – none:
Was this reply helpful? Yes No. Sorry this didn’t help. Choose where you want to search below Search Search the Community. Could a firewall be interfering with nne: zoom sessions? This thread перейти на источник locked. Mefting can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse. Details required :. Cancel Submit. Ashton W Independent Advisor.
Hi Martha, I am an independent advisor and a Microsoft user like you, and I would be happy to help you out with this. Just to confirm, are you referring to Zoom zoom. If so, yes it is meetong possible. Typically I как сообщается здесь found it connects fairly easily by downloading the necessary program through the web browser.
Note: This zoom meeting connector firewall ports – none: a non-Microsoft website. The page appears to be providing accurate, safe information.
Watch out for ads on the site that may advertise products frequently classified as a PUP Potentially Unwanted Products. Thoroughly research any product advertised on the site before you decide to download and install it. I hope this has helped you. If this is not what you are looking for, or if you are able to provide specific error messages, please reply and let us know and we would be happy to look into providing some different suggestions! Regards, -Ashton.
Thanks for your feedback. How satisfied are you with this reply? Thanks for zoom meeting connector firewall ports – none: feedback, it helps us improve the site.
In reply to Ashton W’s post on March 1, Thank you Ashton. For some reason the issue disappeared on its own!! Thanks for the reply. This site in other languages x.